Front ~ The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece. For Mercedes 123, and 126 chassis cars. Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten. Saves approximately 20 hours labor time versus replacing the entire sway bar.
For Mercedes imported USA models with self-leveling/hydraulic suspension, will not fit gray-market Euro models. Due to ground shipment only restrictions, this unit cannot be shipped outside the 48 contiguous...
You will receive your first newsletter within 1-2 weeks. If you wish to unsubscribe from our newsletter at any time, open one of our newsletter emails
, scroll all the way to the bottom and you will see an unsubscribe link. If you have have any questions or concerns, please contact our Customer Service.
Sign Up for Newsletter
Thank you for choosing to sign up for AutohausAZ newsletter. Please provide additional information below and click the Confirm button to finish.
Quick Part Number Search
Enter a part number below to search our catalog. You can use special characters and spaces (i.e. D2045T, 141.43512, 1K0 199 232J).
We didn't find any parts for .
We found part(s) for .
Can't Find What You Need?
Fill out a parts request or give us a call toll-free at 1 (800) 240-4620.