BMW 3.0 Oil Filter Housing Gasket Parts
Showing 4 out of 4 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $4.39 and $110.14 for a BMW 3.0 oil filter housing gasket.
What Are The Signs That The BMW 3.0 Oil Filter Housing Gasket Is Failing?
If the BMW 3.0 oil filter housing gasket starts to go, you’ll probably notice a few things right away. One of the first signs is oil seeping out around the filter housing or dripping down the engine block. Sometimes it collects on the undertray. The smell of burning oil can show up too—especially after a drive, when oil leaks onto hot engine parts. Some folks spot a low oil level or a warning light popping up before the leak is even obvious. You might pull the dipstick and find oil levels dropping faster than usual. If left alone, oil can coat hoses or belts nearby and make a mess, or even reach the garage floor. If you see any of this, it’s worth checking the gasket sooner rather than later.
How Difficult Is It To Replace The BMW 3.0 Oil Filter Housing Gasket?
It’s a job that sits in the middle on the difficulty chart. You’ll need to crack open the area around the filter housing, which usually means pulling off the intake manifold and scooting some hoses out of the way. If you’re good with wrenches and patient with tight spots, you can do this at home. Plan for a few hours in the garage. A first try might take a bit longer, especially if a stubborn bolt slows you down. Some folks get halfway and call a shop. Nothing wrong with that. Either way, it’s not a quick job, but it’s doable if you stay organized and take your time.
What Are The Consequences Of Ignoring A Leaking BMW 3.0 Oil Filter Housing Gasket?
Ignore an oil leak like this, and it gets expensive quick. Low oil leads to engine parts rubbing without enough protection, which wears bearings and moving parts. If oil finds its way onto the serpentine belt, it may slip or shred early—leaving you on the side of the road. Over time, engine performance takes a hit, and repairs go from gasket replacement to something much bigger. Catching it early can save you from a blown engine or costly overhauls.
What Parts Should Be Changed Along With The BMW 3.0 Oil Filter Housing Gasket?
While you’re in there, swap out the oil cooler gasket too. It’s often just as old and in the same hard-to-reach spot. Many replace intake manifold gaskets, and check the O-rings on oil lines. If oil’s been leaking for a while, changing the serpentine belt and any soaked hoses is smart. Bundling these jobs means you won’t have to go back in anytime soon.
What Is The Cost To Replace The BMW 3.0 Oil Filter Housing Gasket?
Shops charge anywhere from $450 to $800, most of that is labor. The gasket itself isn’t much – sometimes $30 to $50, unless you get the entire kit. Do it yourself, and you’ll save hundreds, but you’ll invest the time. If you need new belts or more gaskets, tack on a bit more. Prices swing by where you live and what else you find when you’re under the hood.
Why Choose AutohausAZ For Your BMW 3.0 Oil Filter Housing Gasket?
People pick AutohausAZ because they make it easy to get good parts without jumping through hoops. You won’t pay dealer prices, but you’ll still get name-brand stuff. Orders move fast, and if you mess up and buy the wrong part, their returns are hassle-free. They keep things simple—no runaround, just straight answers and steady support. Between the fair prices, quick shipping, and real customer service, you can focus on fixing your BMW, not chasing down parts. That’s why BMW owners keep coming back.
