Lemforder Control Arms, Tie Rods, Engine Mounts and More
The Lemforder brand has been around for over 70 years and supplies over 50 OEM vehicle manufacturers with suspension and steering components. AutohausAZ carries a wide range of high quality Lemforder products including control arms, ball joints, stabilizer links, tie rods, engine & transmission mounts, and numerous other rubber-to-metal mounts. All Lemforder components are OE spec and will mount up exactly the same as the originals on your vehicle for a direct fit replacement.
Your car depends upon all the suspension components working properly to maintain a safe smooth ride and over time these components need to be replaced. And just as important is the occasional maintenance of your steering components which will wear over the years as well. So if you feel more vibrations than usual or hear unusual squeaks or clunks, it’s time to have these components checked out.
Try our different intuitive search functions like Category, Repair Job or Part Grouping.
Start your search with a category name like Belts and Cooling, Brakes, etc.
Start your search with a repair job name like 3000-3500 Mile Checkup (3 month), Clutch Replacement, etc.
Start your search with a part type like Bulbs and Lighting, Filters, etc.
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Lemforder Control Arms
Whether you have A-arms or a multilink suspension, Lemforder has a direct fit replacement manufactured to the same specifications as your original equipment. Most European cars come with Lemforder control arms installed at the factory, so you know the OE quality is built in. Some control arms are made to allow for replacement of the bushings while others you must replace the entire control arm assembly. Be sure to check if the new control arms come with the ball joints preinstalled or if you need to order ball joints as well. The ball joints allow the control arms to pivot as you drive to adapt to road surfaces and turning. New ball joints are a must if you replace the control arms or the control arm bushings. Because most cars use the control arms to set proper wheel alignment, it is always recommended that you get a wheel alignment after control arm replacement for safe operation of the car.
Lemforder Tie Rods
The tie rod assemblies are attached at the steering knuckle at each wheel and at the rack assembly or the conventional steering gear center link. Those tie rods are not only to allow you to turn your wheels but are also used to adjust your wheel alignment along with the control arms. Using high quality OE-spec Lemforder tie rods ensures that your steering system is brought back to the OE standard and you have the proper adjustability for your mechanic to align your wheels. As with the control arms, once you replace the tie rods you should have the wheel alignment checked and adjusted as needed for the safe operation of the car.
Lemforder Engine Mounts
Your engine is in constant motion when running and the engine mounts insulate those vibrations from the rest of the car. If you start hearing or feeling vibrations when the engine is under load (like going up a hill) then it’s time to check the condition of your engine mounts. Replacing your engine mounts with high quality Lemforder mounts will put your engine back to smooth and comfortable operation. All Lemforder mounts are built to the OE specification for your model and engine. Whether you have conventional rubber-to-metal mounts or the latest electronic damping mounts, check out the Lemforder engine mounts in the AutohausAZ catalog. You can find them under the Engine category.